How do I perform a Speed Test?

To get started, navigate to the Speed Test tab and press Start. Identi-Fi will automatically ping your nearby hosts and select the one with the lowest latency – although if you prefer, you may choose any of the hosts listed. Once you are ready, press Go, and Identi-Fi will take care of the rest.

How do I share my Heat Map?

To share your heat map you only need to press the “Share” button in the upper right hand corner. Next, we’ll ask you to select which application you’d like to use to share your results, and you’re done!

 

How can I use Manage Networks to connect to Wi-Fi?

At the top, you’ll also see your networks signal strength compared to all other networks in your area.  You can also connect to other networks directly through the application, and the process is easy!  Just click on the network you wish to connect to, enter the password, and we’ll get you connected.

How do I run a scan to see which devices are connected to my network?

You can see which devices are connected to your network by heading to the Connected Devices section.  Once you’re there, all you need to do is press the “Scan” button, and Identi-Fi will discover the devices on your network.

Identi-Fi iOS

How can I choose which networks to be visible in the Network Analyzer?

You can choose which networks to show on the Network Analyzer graph by using the green Filter Networks button at the top of the screen .  All you need to do is select which networks you want to appear, and Identi-Fi will do the rest.

How do I create a Heat Map?

To create a heat map of your home or office, navigate to the Signal Strength screen and press the Green Select/View button next the Heat Map as shown below:

We’ve filled out some pre-defined rooms for you, but feel free to Add or Edit any room using the buttons that we’ve labeled below:

Once you’ve filled out the rooms you want to test, walk with your device to each room labeled and press  the “Test” button next to the room that you’re in.  .  Repeat this process for every room that you’ve labeled, and once finished, Identi-Fi will have sorted your rooms from strongest signal strength to weakest.

How do I install?

The easiest way to find our product is to search “Identi-Fi” in the Google Play store!   You can also find it by searching our company name, “SecurityCoverage”, and you’ll also be able to see if any of our other applications are of interest to you.

You can also find it by using this direct link: https://play.google.com/store/apps/details?id=com.securitycoverage.identifi&hl=en

How do I switch Frequency in the Network Analyzer?

The Network Analyzer screen’s default view is to show you 2.4GHz networks, but you can easily switch between 2.4 and 5GHz by pressing the green “Switch” button next to the Frequency label.

How do I know if my signal strength is optimal?

To check if your signal strength is in the “normal” range, navigate to the Signal Strength section and let our real time scanner do the work for you.  If your signal strength result is green you’re exactly where you need to be.  If you’re signal strength is yellow you are below average, and if you’re signal strength is in the red, your signal strength is extremely poor and needs immediate attention.